The Raise has 4 LED effects. These effects can be selected when you press the LED NEXT or LED PREVIOUS key.
On the factory default layer, which is the layer that the Raise comes with before you configure anything, the LED NEXT function is located on the Dygma key on the right half of the Raise.
To put the LED NEXT function on your Raise, select LED NEXT in the Key Configuration menu on Bazecor and assign that to any key.
Use the LED TOGGLE key, to turn the LEDs on and off.
The effects of the LEDs are as follows:
- Custom LED mode - this is the LED mode that follows the default layers.
- Rainbow mode - this LED mode shows the different colors of the LEDs.
- Wave mode - in this mode, solid colors change at the same time, starting with the color red, then green, then blue, and back to red.
- Stalker mode - in this mode, the keyboard's lights appear off but when a key is pressed, the LED of that key lights up then slowly fades.
Note: On the Custom LED mode, you can customize all LEDs. On the other 3 effects, you can't. You can only activate those effects.