What does the rainbow mode like?
How do I put the LEDs on rainbow mode?
The Raise has 4 LED effects. These effects can be selected when you press the LED NEXT or LED PREVIOUS.
On the factory default layer, which is the layer that the Raise comes with before you configure anything, the LED NEXT function is located on the Dygma key on the right half of the Raise.
To put the LED NEXT function on your Raise, select LED NEXT in the Key Configuration menu on Bazecor and assign that to any key.
Why does the keyboard need to be on rainbow mode to update the firmware?
When updating the firmware of the Raise, in order for it to update correctly, all the LEDs must be on their brightest. Why?
There's currently a bug in the firmware update that, for some computers, doesn't successfully flash the firmware if the LEDs are off or dim. We decided to put that rule of putting the LEDs on rainbow mode for simplicity because all the keys are at their maximum brightness when in that mode.
How do you put the keys at the maximum brightness?
1. On Bazecor, select the color and open the color palette. The color picker has to be dragged to the top section.
2. Go to Preferences, put the LED brightness to maximum.