The Defy and the Raise 2 have two different wireless connection options and can also be used in wired mode; let’s explore how to set each of them.
- Wired.
- Connect the Neuron to the computer.
- Connect the halves to the Neuron using the cables provided alongside the Keyboard.
- Make sure the cables are completely inserted in the Neuron. Otherwise, the keyboard might resort to wireless communications.
- Low-latency Radio Frequency (RF):
- Unplug both halves while connecting the Neuron to the computer using the USB cable.
- Switch to wireless mode by toggling the switches on the back of the halves.
- Each half sends a Radio Frequency signal directly to the connected Neuron.
A brief red blinking after unplugging indicates the establishment of a connection between the halves and the Neuron.
- Bluetooth Low Energy (BLE) can connect with up to 5 devices.
-
- Unplug the keyboard completely.
- Ensure the wireless switch is in wireless mode.
- Plug the Neuron directly into the base of the Dygma Defy.
- Five blue lights on the number row represent available slots, each for a device.
- Choose a channel (e.g., 1) and select it on your computer's Bluetooth preferences.
- The UI displays colors: Blue for available, White for assigned, and Green for active channels.
- If you’re connecting for the first time to the device. Enter the code displayed in the device the keyboard connects to.
- You can reset a channel by holding the red key underneath.
Please remember to keep your software and firmware updated to enjoy these features and the best performance of the keyboard.