Each side of the keyboard has a 2370 mAh battery, so it's 4740 mAh total. With the current firmware, the battery should last up to 20 hours with full LED brightness. With brightness at 30% and True Sleep active, you can expect 3-4 days, and without LEDs, a bit over that.
However, we are working to vastly improve that with future firmware updates. You can also configure different LED brightness settings to adjust battery consumption.
To make sure that you're getting the most out of your battery, please try the following:
- Update the firmware to the latest version; you can do so in the firmware update menu on Bazecor.
- Lower the brightness of your LEDs. You can configure your per-key and underglow LEDs separately under Preferences > LED. You can also configure different brightness for wired and wireless.
- Set a shorter LED timer off so the LEDs turn off sooner. You can do that under Preferences > LEDs
- Enable True Sleep and Energy Saving Mode under Preferences > Battery Management.
Keep in mind that to wake the keyboard from True Sleep, you need to press any alphanumeric key on each side. The keyboard will blink red briefly before reconnecting.
Here's all the relevant information regarding charging:
We want to reiterate that we're working to improve the battery life through firmware updates.